Türkçe English
 
 
> Cable Products
> Flexible Packaging Products
>Insulation Products
Cable Products
Our core business has always been the cable industry. We produce insulating; semi-conductive and conductive films, tapes and foils for the cable industry. The requirement for special materials is very varied in the cable industry. From safety cables that have to perform in extreme fire conditions to communication cables where shielding is the prime factor for the correct transmission of data. In Besel we are flexible enough to meet your various requirements and fast enough to meet your deadlines. We are always developing new products in close collaboration with cable engineers to satisfy technical requirements and facilitate trouble-free processing during cable manufacture.
  Alu-Pet
a
 
Aluminium foil in the structure gives a high degree of shielding and offers protection from external electromagnetic interference. Polyester film provides electrical insulation while assuring high mechanical strength.
  Alu-Pet-Alu
a
 
Aluminium foil in the structure gives a high degree of shielding and offers protection from external electromagnetic interference. Polyester film provides electrical insulation while assuring high mechanical strength.
  Alu PP Laminates
a
 
Aluminium foil in the structure gives a high degree of shielding and offers protection from external electromagnetic interference. Polypropylene film provides electrical insulation while assuring high mechanical strength.
  Alu-Pet-Copoly
a
 
Additional “copolymer” in the structure enables the foil to give a permanent adhesion to PE core and itself even under low processing temperature.
  Cu-Pet
a
 
Copper foil in the structure gives a higher degree of shielding and offers protection from external electromagnetic interference. Polyester film provides electrical insulation while assuring high mechanical strength.
  Polyester Tape
a
 
Polyester film is flexible, strong and durable. Thanks to its high mechanical strength, and high resistance against water vapor and chemicals,  it serves properly in electrical insulation, cable insulation and many other industrial applications.
  Aluminium Tape
a
 
Soft – annealed pure aluminium tapes for cables.
Aluminium content ( Min. 99% by weight)
Tensile strength : > 100 N/mm2
  Copolymer Coated Aluminium Tape
a
 
Consists of aluminium foil coated uniformly with copolymer film on one side or both sides with perfect lamination and is used to separate groups of conductors in telephone cable, preventing interference and cross-talk. The copolymer provides excellent adhesion to the aluminium substrate and has the chemical resistance and general characteristics of low-density polyethylene and gives excellent bond strength to all types of polyethylene.
  Copolymer Coated Steel Tape
a
 
Consists of low carbon; chrome coated steel coated uniformly with copolymer film on both sides with perfect lamination and is used for corrugation shield in fiber optical cables. The copolymer provides excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of low-density polyethylene and gives excellent bond strength to all types of polyethylene.
  Fleece Tape
a
 
Polyester base non-woven tape for bedding & separating purposes that can withstand extrusion and vulcanization temperatures.
  Alu-PVC Bondable Tapes
a
 
Aluminium foil coated with PVC bondable films (PVC films; PVDS coated PET films or heat-sealable PET films). Aluminium foil coated with speacial plastic film is bonded to PVC jacketing; especially used for automotive cables.
  Copolymer Coated Copper Tape
a
 

Copolymer coated copper tape is made by lamination of rolled-annealed ETP copper tape to ethylene copolymer film. The copolymer film in the structure provides excellent bonding to polyethylene based jackets during the final extrusion process. Copolymer coated coppler tape is used for sheathing medium and hight voltage power cables, or as the combination shield/moisture barrier over a wire or tape screen.
Conductivity of the copper tape is min 100 % IACS.

  Semiconductive Non-woven Tape
a
 
Semiconductive tapes are manufactured from polyester based non-woven fabric by treating with a conductive material to reach desirable conductivity level.
Most common use is in power cables, wrapping it under neutral screen wires, under metallic jackets (lead, steel, copper or aluminium jackets) to keep contact with outer semiconductive layers. Other usage is between cable segments (for multi core cables), or under and between armouring layers.
  Mica Tape
a
 
Mica is responsible for the outstanding fire resistance of our tapes. The mica fuses together and to the copper conductor when exposed to fire, thus forming a mechanically resistant and electrically insulating layer. Mica is an alumino-silicate mineral with laminar structure.
  Crepe Paper
a
 
Insulation crepe kraft paper is one of the most important solid insulation for the wire & cable. The base paper has a very uniform formation and 100% unbleached sulphate conifer wood pulp.
  Kraft Paper
a
 
Kraft paper is used to prevent bonding of isolated cable groups to cable jacket for PVC and PE insulated power cable. It replaced convetional talc/calcite in the process; eliminating the dust in the process and provides a clean, neat peeling of cables.
Papers:40gr/m2
  Glass Fabric
a
 
Flame-retardant halogen-free tapes of woven glass fabric for high-temperature / flame-retardant security cables. They function as fire barrier within cables which need to meet more demanding fire propagation and fire survival requirements.
  Aluminium Alloy Wire
a
 
Aluminium magnesium alloy wire is an economical
alternative to copper wire for coaxial cable braiding.
  PP Foam Tape
a
 
Polypropylene(PP) foamed tape is used for wrapping and insulating power cables; mainly usage is wrapping of the assembled insulated cable cores.
PP foam tape is an extruded mono-oriented tape with reduced density by gas foaming and in white color.
  Compact PP Tape
a
 
Compact Polypropylene (PP) tape is used for wrapping telecom and power cables/ Compact PP tape is produced by extrusion of PP resins; and transparent in color. Due to its low density and high mechanical properties, it's an economicak wrapping fim. Softness of the film also prevents shape deformations in cable profile.
Available on pads and spools.
  Numbered Tape
a
 
5 mm wide PET or PP films; on cross-wounf spools. Printed on black color. on white or yellow background. Used to identify pairs, or groups in telecommunication and instrumentation groups.
  Glass Fiber Yarns
a
 
Glass fiber yarn has high tensile strength; good electrical insulation; heat and chemical resistance. It's usually used for braiding in copper wire for fire-proff silicon cables.
 
 
BEŞEL BASIM SANAYİ    
PERPA Ticaret Merkezi A Blok Kat 6
No: 547 34834 Sisli - Istanbul
   
(T) +90 212 222 75 65 (Pbx)
(F) +90 212 222 50 57
(E) info@beselfoil.com
© 2004 - 2009 Beşel Basım Sanayi V.2 | Tasarım ve programlama ASYA