Tela Bantlar

FLEECE TAPES


Polyester base non-woven tape for bedding & separating purposes that can withstand extrusion and vulcanization temperatures.

Tip 25 HF 40HF
Birim Ağırlık 25 gr/m² 40 gr/m²
Gerilme Direnci >22 N/cm >33 N/cm
Uzaman >12 % >12 %

SEMICONDUCTIVE TAPES


Semiconductive tapes are manufactured from polyester based non-woven fabric by treating with a conductive material to reach desirable conductivity level.

Most common use is in power cables, wrapping it under neutral screen wires, under metallic jackets (lead, steel, copper or aluminium jackets) to keep contact with
outer semiconductive layers. Other usage is between cable segments (for multi core cables), or under and between armouring layers.
Available on pads and on spools.
Birim alan başına kütle 40 gr / sqm (+/- 10 %) ISO 9073-1
Kalınlık 0,16 mm (+/- 10 %) ISO 9073-2
Gerilme Direnci Min 25 N/cm ( MD ) ISO 9073-3
Uzama Min 12 % ( MD) ISO 9073-3
Hacim direnci Max 1000 Ωcm DIN 54345
Maksimum işleme sıcaklığı 230º C IEC 216
Uzun süre dayanıklılık 145ºC IEC 216

SWELLING TAPES / WATER BLOCKING TAPES


Water Swellable tapes are designed to prevent water penetration into fibre optic, copper data/telecom and power cables. Super Absorbent Polymers gives these tapes best performance as soon as the water contacts to the tape. Water swellable tapes are proven as a replacement for conventional filling gels in optical fiber cables.
Birim alan başına kütle 80 gr / sqm (+/- 10 gr) ISO 9073-1
Kalınlık 0,20 mm (+/- 0,03 mm) ISO 9073-2
Gerilme Direnci Min 25 N/cm ( MD ) ISO 9073-3
Uzama Min 12% ( MD) ISO 9073-3
Şişme Hızı Min 8 mm/min Besel internal
Şişme Yüksekliği Min 10 mm/ 3 min Besel internal
Maksimum işleme sıcaklığı 230º C IEC 216
Uzun süre dayanıklılık 90ºC IEC 216

SEMI-CONDUCTIVE WATER SWELLABLE TAPES


A combination of semi-conductive and water swellable tapes. The tape wrapped under neutral screen wires, under metallic jackets (lead, steel, copper or aluminium jackets) to keep contact with outer semiconductive layer ; at the same time to prevent water penetration into the cable
Birim alan başına kütle 120 gr / sqm (+/- 10 gr) ISO 9073-1
Kalınlık 0,30 mm (+/- 0,03 mm) ISO 9073-2
Gerilme Direnci Min 30 N/cm ( MD ) ISO 9073-3
Uzama Min 12 %( MD) ISO 9073-3
Şişme Hızı Min 8 mm/min Besel internal
Şişme Yüksekliği Min 12 mm/ 3 min Besel internal
Hacim Direnci Max 1000 KΩcm DIN 54345
Maksimum işleme sıcaklığı 230º C IEC 216
Uzun süre dayanıklılık 90ºC IEC 216